Manufacturers that provide high-quality label nameplates OEM services.
Language
Manufacturers that provide high-quality label nameplates OEM services.
1). Always keep the power plug dry.
Always keep the power plug, socket, power cord and automatic switch device of the electric kettle dry and clean.
2) The water injection shall not exceed the water level line.
Do not fill the water above the water level line, so as not to overflow the pot when the liquid is boiling, and the amount of water to fill is not too small, otherwise it will dry quickly. Especially for whistling electric kettles, the outlet pipe must be at least 20mm or more, otherwise the electric heating pipe will easily burn out when exposed to the surface of the water. In addition, be careful not to install water after turning on the power supply, otherwise the heater may be burnt out or a dangerous accident may be caused.
3). Someone should take care of it during use.
4) Pay attention to safety when using, and avoid dry burning. If left unattended, after the water is boiled, the electric kettle of the infinite thermostat will keep drying the water. For electric kettles equipped with an automatic reset temperature regulator, the water will dry out due to repeated heating. If the over-temperature protection function fails again, it may cause a fire accident.
5). Do not let children touch the kettle body or touch the power cord.
When using an electric kettle, be careful not to let children touch the kettle or touch the power cord to avoid burns and other accidents.
6). Take the boiled water after cutting off the power supply.
Electric kettles that are still connected to the power supply just after boiling are likely to cause harm when flushing water or beverages. In order to avoid boiling water burns, the plug should be dropped, cut off the power supply, and then take boiling water to ensure safety.
7). The scale should be checked regularly and cleaned up according to the instructions.
If the electric kettle is used for a long time, there will be scale on the surface. Scale not only affects the thermal efficiency, but also sharply increases the heat in the tube and damages the electric heating tube. So check regularly and clean up in accordance with the instructions. 1. Wash the pot well. If the kettle is used for a long time, there will be some scale at the bottom, so before boiling the water, wash the dirty things in the pot first, so that you will not drink unhealthy water. You can use vinegar. It is simple and convenient to clean.
1. Fill the kettle with water, and then fill the kettle with water. Note that the more the water is, the better. About two-thirds of it is fine. The water level is just right. You can install the water to this position. The pot is covered.
2. Dry the base. The base of the kettle must be wiped clean before it can be used. Do not let the base have water, otherwise it is very dangerous. Check the base first, and then wipe it with a dry cloth or paper towel. Put the kettle on it.
3. Plug in the electricity, and then plug the plug of the base of the kettle into the socket. When plugging in, make sure that there is no water in your hand, so that it is safe.
4. Start the boiling water button. After everything is done, there will be a button on the back end of the kettle. This is the boiling water start button. Click this button to start boiling water.
[Disclaimer: The above content comes from the Internet, and does not represent the views of this site. I hope some of the content can help you. 】
We (Alice) are a manufacturer (manufacturer) specializing in the production of nameplates for home appliances. We have 21 years of experience in making furniture signs. We can produce zinc alloy, aluminum alloy, stainless steel, copper, brass, iron, titanium, Different labels such as PC, PET, PE, pvc, etc.
Contact us E-mail: sales03@alicelogo.com
whatApp: +86 132 6564 6796
Alice has dedicated to precise product since it was established in 1998, especially focus on furniture and electronic appliances field as a tendency.
