A. Use 5L of warm water to prepare an appropriate amount of cleaning and disinfection solution, and pour it into the two tanks in equal amounts;
B. Turn on the power and press the cleaning button, stir for about 5 minutes, press down the handle to remove the cleaning liquid;
C. Rinse with clean water 2 to 3 times, press the stop button to turn off the emergency stop switch;
D. After turning off the power, disassemble and wash the parts;
1. Unscrew the 4 screws on the discharge valve, and remove the discharge valve assembly;
2. Remove the handle fixing pin, handle, valve stem, valve stem sealing ring, and discharge valve sealing ring in turn from the discharge valve assembly;
3. Pull out the stirrer from the freezing cylinder and remove the stirring sealing sleeve;
4. Clean the dismantled parts one by one, if possible, try to unload the dismantled parts
5. Soak in the disinfectant for more than 10 minutes to eliminate all kinds of bacteria, molds and viruses that are harmful to the human body. 6. Then wash it again with clean water to check the degree of wear and replace it if necessary.
7. Assemble the parts according to the reverse steps of disassembly and assembly. When assembling the valve stem and the sealing sleeve, lubricate the sealing ring and the sealing sleeve.
[Disclaimer: The above content comes from the Internet, and does not represent the views of this site. I hope some of the content can help you. 】
We (Alice) is a manufacturer specializing in the production of home appliance signs, focusing on providing supporting services for the furniture industry, machinery industry, electronic and electrical industry and other industries, mainly producing zinc alloy, aluminum, stainless steel, copper, brass, pvc, etc. Label.
Contact us E-mail: sales03@alicelogo.com