Manufacturers that provide high-quality label nameplates OEM services.
Language
Manufacturers that provide high-quality label nameplates OEM services.
1. Installation steps of the drying rack lifter-the distance between the two drying poles: it depends on the width of the balcony, generally 45-50 cm, especially wide balconies, the spacing can be appropriately widened;
2. Installation steps of the drying rack lifter-the distance between the two hanging balls of each drying pole: generally about 1.5-2 meters.
3. Installation steps of drying rack lifter-hand crank Choose a suitable wall to install the hand crank.
4. The installation steps of the rack lifter-the principle of determining the orientation is: does not affect the entry and exit of people; not too close to the sink; cannot be installed directly under the line of the two double wheel top brackets. Hand crank installation height: about 100 cm above the ground, suitable for the owner to use comfortably;
5. Drying rack lifter installation steps-the corner device is installed in the corner directly above the hand crank, or on the ceiling near the corner directly above the hand crank. We highly recommend installing it on the ceiling, but it is impossible to install it on the ceiling. , Had to be installed on the wall. Note: The corner device can be installed where there is an "installable surface"; however, it cannot be installed in a place marked with "installation blind zone". The so-called "installation blind zone": the extension line of the connection between the two top brackets (referring to the double wheel top bracket) cannot be installed with a corner device, because the two lifting ropes will overlap and rub the bracket.
[Disclaimer: The above content comes from the Internet, and does not represent the views of this site. I hope some of the content can help you. 】
We (Alice) are a professional manufacturer of furniture nameplates, focusing on providing supporting services for the furniture industry, machinery industry, electronic and electrical industry and other industries, mainly producing zinc alloy, aluminum, stainless steel, copper, brass, pvc, etc. Label.
Contact us E-mail: sales03@alicelogo.com
Alice has dedicated to precise product since it was established in 1998, especially focus on furniture and electronic appliances field as a tendency.
