1. Check whether the product components are completely installed before turning off the balcony power supply.
2. According to the size of your balcony, determine 4 fixed positions for punching holes. The depth of the hole is at least 4 cm or 5 cm earlier. Loosen the screw so that the distance between the washer and the nut is about 5 mm, and remove the nut at the other end.
3. Carefully hold the host, and insert one end of the host on the gasket of the two expansion screws. Connect the brown wire to the live wire, the blue wire to the neutral wire, and the yellow-green two-color ground wire; then wrap it with insulating tape and place it in the gap between the host and the ceiling.
4. Install the scissors frame at both ends to the host. Please pay attention to the motor end and the non-motor end. There is a travel switch on the motor end to control the scissors frame up and down. Please note that the side of the scissors frame with pulley should be installed at the motor end. Use 2 M5x6 screws to screw on the shrapnel position of the travel switch (the screws should not be over tightened if they are in place, over tightening may cause the scissors frame to fall and rise abnormally), then the wire rope is inserted into the balance device and the wire rope is inserted into the screw lock slot Then tighten the screws to fix the wire rope.
5. Hang the quilt rod on the support seat at both ends of the clothes rod (Important note: This operation is to increase the weight of the scissors rack set at both ends to balance the force on the scissors rack to prevent the wire rope from loosening, and remove the items under the clothes dryer to prevent the clothes rod (The descent process is blocked and the wire rope is unbalanced)
6. Turn on the balcony power supply, and test whether the branch machine works normally.
7. Press the down button of the remote control, when the clothes rail is down to 1.2 meters, the host will automatically stop. At this time, first unscrew the clothes rail clamping screw, and then pick up the fixed clothes rail with both hands and put it into the clip slot, and then fix it Tighten the clothes rail clamping screw.
8. After completing the installation operation, you should follow the above important tips and remote control operation method to use this product for introduction (Important tip: the pole should be placed in the correct position of the clothes pole support frame to prevent the scissors from being stuck by the pole and causing the scissors to rise. (Frame variants and other influences)
[Disclaimer: The above content comes from the Internet, and does not represent the views of this site. I hope some of the content can help you. 】
We (Alice) are a professional manufacturer of furniture nameplates, focusing on providing supporting services for the furniture industry, machinery industry, electronic and electrical industry and other industries, mainly producing zinc alloy, aluminum, stainless steel, copper, brass, pvc, etc. Label.
Contact us E-mail: sales03@alicelogo.com