Maintenance and maintenance of solid wood dining chairs
1: Pay attention to the cleaning and maintenance of the surface of the dining table and chair. Wipe off the dust on the surface regularly with a pure cotton dry soft cloth. At regular intervals, use a damp cotton thread that has been wrung out to clean the dust on the corners of the dining table and chair. Then use a clean dry soft cotton cloth. wipe. Avoid using alcohol, gasoline or other chemical solvents to remove stains.
2: If there are stains on the surface of the dining table and chairs, do not rub it hard. You can gently remove the stains with warm tea water. After the water evaporates, apply a little wax to the original part, and then lightly rub it several times to form a protective film.
3: Avoid scratches on hard objects. When cleaning, do not allow the cleaning tools to touch the dining table and chair, and be careful not to let hard metal products or other sharp objects collide with the dining table and chair to protect the surface from scratches.
4: Avoid humid environment. In summer, if there is a flood in the room, it is advisable to use a thin rubber pad to separate the part where the dining table and chair are in contact with the ground, and at the same time, keep the distance between the dining table and chair against the wall and the wall at a distance of 0.5-1 cm.
5: Keep away from heat sources. In winter, it is best to place the dining table and chairs at a distance of about 1 meter from the heating stream to avoid prolonged baking, which will cause local dry cracks, warping and deformation of the wood and local deterioration of the paint film.
6: Avoid direct sunlight. It is necessary to avoid long-term exposure to the whole or part of the dining table and chairs by outdoor sunlight, so it is best to place them in a place where they can avoid the sunlight. In this way, the indoor lighting is not affected, and the indoor dining table and chairs are protected.
[Disclaimer: The above content comes from the Internet, and does not represent the views of this site. I hope some of the content can help you. 】
We (Alice) are a professional manufacturer of furniture nameplates. We have 21 years of experience in furniture label making. We can produce zinc alloy, aluminum, stainless steel, copper, brass, pvc and other different labels.
Contact us E-mail: sales03@alicelogo.com