In winter, teach you how to maintain solid wood furniture-Alice factory

2021/09/04

In the cold winter, in order to keep warm, homes will use air conditioners, heaters and other heating equipment. Solid wood furniture is most afraid of high temperatures. Long-term high-temperature baking will easily cause the wood to lose moisture, causing the joints of the furniture to crack first, which will cause the panel to deform ,crack. Therefore, the editor warmly reminds friends that the heating equipment in the home must be far away from the solid wood furniture and placed at least 1 meter away.



1. Keep away from heat sources and keep the original humidity of the furniture

In the cold winter, in order to keep warm, homes will use air conditioners, heaters and other heating equipment. Solid wood furniture is most afraid of high temperatures. Long-term high-temperature baking will easily cause the wood to lose moisture, causing the joints of the furniture to crack first, which will cause the panel to deform ,crack. Therefore, the editor warmly reminds friends that the heating equipment in the home must be far away from the solid wood furniture and placed at least 1 meter away.

2. Avoid direct sunlight

Avoid direct sunlight on solid wood furniture. Because there will be a layer of varnish on the surface of the furniture, the solid wood furniture closest to the sun will fade, the material will become very brittle, it will be damaged with a light touch, and the metal fittings will also be oxidized. .

3. Maintain indoor temperature

The climate is relatively dry in winter, especially the use of heating equipment makes the indoor air more dry. It is very important to keep the indoor humidity suitable. Usually, you can use a humidifier to humidify the room. You can place a pot of water or place more plants such as green dill, rich bamboo and other plants that are conducive to indoor moisturizing to increase indoor humidity and prevent furniture from cracking due to dryness. But don't put it near the furniture, so as to avoid excessive moisture absorption of the wood, it will cause mold and cracking. The overall humidity of the room should be controlled at 35%-65%.

4. Reduce dust accumulation and extend furniture life

For the service life of furniture, especially wooden furniture, dust is the number one killer. And as time goes by, dust will accumulate more and more, so you should often clean the furniture. It is recommended to clean the sunken pattern part once a week, wring out the wet towel, and wipe it with professional furniture maintenance oil to prevent the furniture from deforming. At the same time, its service life is extended.

5. Cleaning and maintenance

For daily maintenance, you can use professional wooden household cleaners, which can help remove air pollutants, oil fume, and excess wax on the furniture.

6. Avoid scratches

If there are scratches in the furniture, it will not only affect the beauty of the furniture, but also affect the service life of the furniture. Therefore, in the process of use, you should try to avoid damage caused by direct contact between hard objects or metal products and furniture.

7. Scratch maintenance

If there is a small scratch accidentally, you can choose a wax strip with a color similar to that of the furniture wood to apply to the scratched area to fill in the cracks. Then wax the area again to maintain the gloss.

8. Waxing maintenance

If you want solid wood furniture to have a long-lasting luster, waxing is very necessary. Generally speaking, waxing is done once a quarter, and you can use professional solid wood furniture polishing wax for regular maintenance. Do not use silicone polish, it will damage the coating of the furniture, block the pores of the wood, and hinder the air permeability of the wood.

Hereby declare: The above content comes from the Internet, and the content is for your reference only. If you infringe on your rights, please contact us and we will delete it immediately.


We (Alice) are a professional manufacturer of furniture nameplates, we can produce zinc alloy, aluminum, copper, brass, pvc, etc. Metal signs and nameplates are widely used, covering all walks of life, and support customization. The signs produced are light and practical, beautiful and generous, with exquisite details, smooth workmanship, and strong three-dimensional effect. It is a common surface treatment process.