Cabinets are an important part of bedroom furniture and one of the major pieces of bedroom furniture. Therefore, the quality of the cabinets directly affects the sales of the entire product. According to incomplete statistics, what consumers are most dissatisfied with is the warpage of the cabinet door. "In fact, in addition to material and design reasons, the influence of unfavorable factors in the processing process is the main reason for the bending and deformation of the long door of the high cabinet." A senior panel expert analyzed.
Avoid using irritating and corrosive chemicals such as alcohol and cleaning agents that can damage wood. To
Wooden wardrobes can be wiped with a clean cloth at ordinary times, but if it is dirty, you can use soap or a neutral detergent as appropriate, and wipe it with a damp cloth. Ultraviolet rays are also destructive to wooden furniture. Therefore, it is necessary to use cloth curtains or curtains to avoid sunlight. If you want to wax, it is best to choose a higher concentration, solid, silicone-free wax, so as not to damage the paint surface. To
Improper paint treatment causes deformation of panel furniture components
Deformation caused by stacking of components During production, some operators stack the plates at will for the convenience of the picture, or the backing of the stacked plates is not flat, or even leaning the plates against the wall, causing the plates to enter It was deformed due to its own weight before the next process. Deformation caused by coating process In the coating process, due to improper use of technology and raw materials, the plate will be deformed and deformed with the change of the internal stress of the coating. The effect of finishing putty When finishing the cabinet door parts, many manufacturers use pig blood putty or glue-modulated putty in order to reduce the cost. Because these two putties contain a lot of water, the common substrate for panel furniture-medium density Fiberboard and particleboard are particularly hygroscopic. Therefore, when one side of the door panel is not coated with putty, and the other side is coated with this moisture-rich putty, the door panel will be deformed due to moisture absorption on one side.
The influence of the drying process Many manufacturers in production, when the panels are coated with putty or paint, they must be placed on the drying rack for natural drying. If the drying rack’s support rods are too sparse or uneven, it will also cause the cabinet door The part was found to be bent and deformed during the drying process of the paint. The influence of internal stress of the paint After curing, the paint will form a certain coating, even if there is no external force, an internal stress will be generated. If the internal stress is not handled properly, it will become the main reason for the bending and deformation of the cabinet door components. one.
Hereby declare: The above content comes from the Internet, and the content is for your reference only. If you infringe on your rights, please contact us and we will delete it immediately.
Alice is a manufacturer of nameplates. Since its establishment in 1998, it has been committed to the production of various precision nameplates. With excellent quality, considerate service, and good integrity, it provides customers with a full range of customized signage services.